The KE-94RS "Sear Ready" Pistol will accept any HK-94/MP5 Rear Buttstocks, and has the same Internals as the KE-94K. These are already 922r Compliant and are ready for any SBR conversion without any modifications.
THE KE-94 is a "Sear Ready" Pistol and will accept any of the HK-94/MP5 rear buttstocks. This is already 922r Compliant and is ready for any SBR conversion without any modifications.
The KE-94K "Sear Ready" Pistol will only accept Rear Stocks and Stock adapters made secificly for the SP89 or the MP5K. These are already 922r Compliant and are ready for any SBR conversion without any modifications.
Introducing the Kellyenterprises/Omega Custom line of Sear Ready 922 compliant KE 94, KE 94RS and KE 94k RCM Pistols, Rifles and SBR's. These guns are a high quaility build using only the best RCM USA and HK Milspec parts available. RCM (Rim Country Machine) makes the Highest Quality and Best HK Pattern Parts in the USA. Their HK parts are to Current and Above HK Milspecs. All these guns start with a New LSC Gen 3 upper receiver flat is rolled and welded in house at Omega. To retain the highest quality we are using the following New RCM "F" style MP5 Parts. Pistols and SBR's Include a New RCM Navy Threaded / Trilug Cold Hammer Forged Barrel w/thread protectors, The Rifles will have an 16" RCM Barrel, the same profile as the HK 94 Rifle that was imported, so all the HK barrel accessories will fit properly. All Standard 94's will have New RCM "F" Style MP5 Carriers and Bolt Heads, a New RCM MP5 100 degree locking piece, a New RCM MP5 Standard Trunion, a New RCM MP5 Extractor, and a New RCM MP5 Front site on all our KE-94 Firearms. All the RCM Parts 100% New and are to current HK "F" Military specs.
The rest of the Internal Parts will be new HK MP5 Milspec Parts. We are use New Cocking Tubes along with new date coded HK SEF Polymer lowers. These guns will come with a Choate End Cap w/Sling mount and a Vented MP5 handguard with the correct MP5 Front and Rear Sights installed. The guns are finished with a baked on Chip Resistant Custom Matte Black Finish. Each gun will be Laser bore sighted during the build and extensively factory test fired in Full and Semi Auto modes before it leaves the shop. These will be a perfect host for your HK Full Auto Sears or an SBR or Armbrace Pistol Conversion. We believe that these units will fill a void that exists in the High Quality and Sear Ready HK Style MP5 markets today. These guns come with a Factory 5yr warranty.
Each gun is Quality Checked and test fired at the local range for Accuracy and Function by me when the arrive. The guns are tested with 124 grain and 115 grain 9mm ammunition. Only after passing all the quality checks will they be passed on to the customer. These guns are built correctly and will not require a break in period to run perfectly with standard quality ammunition.
If you look around, there are plenty of 94/MP5 Style guns on the market, Some new from HK licensed mfg's and some US made, But, if you look up the specs on almost all of them you will find they are being built on either new or used older style Action 3 parts sets. We are only using the current upgraded 2015 HK "F" Series New parts sets from RCM on our 94/MP5 Builds. These guns are a very high quaility build using only the best RCM USA and HK Milspec parts available.
We are making Kellyenterprises/Omega KE 94 "RS" OR " Reverse Stretch" Pistol in 9mm, and a KE-94k / MP5K Pistol also. The "Reverse Stretch" is an 94/MP5 Receiver with the shorter 94K/MP5K Internals, RS Recoil Rod and 5" barrel, the same front end that is on the MP5k. This version allows you to install any typical MP5 rear stock, Including Para Telesocks, Choat Side Folders, and Polymer Full Stocks when you do an SBR Conversion. The KE-94k / MP5k pistol we will produce will be similar to an SP89 with full auto bolt carrier. All these guns will be Sear Ready for your ATF Registered Full Auto Sears and 922 compliant for SBR conversions.
Both the KE-94 "RS" and the KE-94k will have RCM MP5K Navy Cold Hammer Forged Barrels and RCM Internals. They will start with LSC Receivers, also hand rolled at Omega. The following RCM Internal Parts will be in both these models. These are the latest HK "F" Style Blueprinted parts. The RCM MP5K Navy Threaded / Trilug Barrels, MP5K Bolt Heads, MP5K Extractors, MP5K 110 Degree Locking piece, MP5K Carriers, MP5K Trunion, and MP5K Front sights. All these parts are marked RCM to verify their quality. All KE German Series Fireams will come with the same Chip resistant Matte Black baked on finish.
We are Proud to post all of the parts our guns are made from. Unlike other MFG's we believe you should know exactly what you are buying. Contact me anytime 7 days a week if you have any questions or need any help with your purchase.
1107 Key Plaza #401
Key West Florida 33040
305-923-6560 Sales 9-9 daily
Most models are in stock, and I am accepting Orders now for any model you desire. Call Chuck 305-923-6560 anytime between 9am-9pm, 7 days a week for more details. Thanks for looking and Enjoy the Sights.
Kellyenterprises/Omega KE-94 "F" PISTOL w/RCM Barrels and Internals....